FLEXSHADE® OUTDOOR UMBRELLAS
With a sleek look and designed to last, the Flexshade® waterproof umbrella from Shade 'N' Sails provides the best all-weather protection. The modular umbrella with a PVC membrane cover is built to withstand winds of up to 160 km/h. The gold standard in outdoor weather protection, Flexshade® outdoor umbrellas facilitate fantastic sun and rain protection. Certain square frame models allow the attachment of side curtain blinds for totally protected areas. Engineer designed to survive extreme conditions, these permanent umbrellas are made to last.
- Long lasting fabric
- Durable steel frame
- 10 years structural warranty
- Engineered to AS1170 Australian standards
- 3D computer designed
- Range of colours
An Architecturally Diverse Range of Products
With a range of shade options to choose from, Shade 'N' Sails have got you covered:
Quartet
Single square canopy with a centre post
Hexagonal
Single hexagonal canopy with a centre post
Side Post
Cantilever umbrella with a single side post (square or hexagonal)
Beam Edge
Square edge frame for additional coverage and designed for mounting blinds and other structures (centre post or side post)
Duet
Twin canopies cantilevered off a single side post
Links
Join multiple canopies together to eliminate gaps
Pivot
Rotate or swivel canopy to increase shade area by over 250 percent
Tough Fabric
Waterproof PVC is the chosen canopy material for all Flexshade® umbrellas. The PVDF-coated PVC is high-tear strength and is resistant to fading. This creates a long-lasting canopy, with 100 percent rain and sun protection. Translucent and block-out options are both available.
Wide Range of Frame Colours
Hot-zinc primed steel is powder-coated to your choice of Colorbond colours. This allows for flexibility in design and the ability to match to the existing surrounds.
Heating and Lighting
With the addition of a Heat-Strip® outdoor heater, the Flexshade® umbrella can provide warmth as well as shelter! Another fantastic option is to include additional lighting, creating an alfresco dining feel with the attachment of a stylish stainless-steel light fixture.
Engineered Footings & Hold-Down Bolts
The Flexshade® umbrella is secured using either a concrete pad/pier footing with cage/bolt assembly or chemical anchors and hold-down bolts to an existing concrete reinforced slab. Wind loadings are engineer calculated and each umbrella is designed to Australian standards.
Specifications
Sun Resistance | 100 percent UV block out
Rain Resistance | 100 percent water resistance - impermeable
Canopy Size | The quartet design is from 2.5m square to 8m square. The hexagonal design is from 3.6m diagonal to 5.8m diagonal
Canopy Height | From 2.1 (engineered to required clearance height)
Wind Rating | 160km/h with engineered footings
Wind Load | 1kN at corner
Snow Load | 0.95kPa over ground
Structural Warranty | Framework, fixings and fittings all come with 10-year manufacturing warranty
Fabric Warranty | PVC fabric is made to last with 10-year warranty against fading and degradation
Website
Send Enquiry To Shade 'N' Sails